“U” Codes Drive You Nuts? This Free Webinar Will Restore Your Sanity

“U” Codes Drive You Nuts? This Webinar Will Restore Your Sanity

Mitchell 1 sponsors free webinar with Motor Age –
If you missed the live event, you can watch the RECORDING!

We’ve all been there. Connect our scan tool to the Diagnostic Link Connector and there is no communication with any Electronic Control Unit on the network. Or we check the health of the various modules only to find one or more with a “Uxxx” Diagnostic Trouble Code stored. Or a module we know perfectly well is in the car cannot be found on our scan tool’s data stream.

Now what?

Get some great tips and information in an upcoming free webinar on Saturday, May 23rd at 6:00 pm (EDT): Diagnosing “U” Codes – Network Communication Faults. The webinar is sponsored by Mitchell 1 and hosted by two well-known industry experts: Pete Meier, Motor Age technical editor, and Jerry “G” TrugliaATTS Training Center & TST President.

Handling problems with network communications requires a good understanding of the protocol in use, the topography of the bus network and what networks contain which modules. In this Motor Age Training/ATTS webinar, you’ll get the foundation you need for future success in repairing what can be an elusive problem.

Mitchell 1 is very pleased to sponsor this webinar – and it’s FREE to attend.

UPDATE! The webinar on May 23, 2015 offered some fantastic information that you won’t want to miss. If you didn’t catch the webinar live, you’re invited to view the recording at no cost until August 23, 2015 on the Motor Age website. Click below to watch the webinar and download the course materials.

Posted in:
About the Author

Gary Hixson

Gary Hixson is a Sr. Market Manager at Mitchell 1, and is responsible for product and market management of the Repair Information product line. Most recently he managed the release of ProDemand™, the industry-leading repair, diagnostic and maintenance information system.